Tools You Should Have When Constructing Your Wooden Playhouse

So you’ve chosen your location and the type of wood you’ll be using for your wooden playhouse. The next most important step is to make sure you have the right tools. Just like my previous article about choosing the right wood type, this article will not be going into specifics (ie brand names, etc), as the right tools can be fairly cheap, or unbelievably expensive! In the case of tools, you really do get what you pay for. If you decide to go cheap and nasty, you may be making a few trips back to the hardware store to buy replacements. If you go expensive, your costs will be blown out of the water! Do you need to spend $500 on that tool that you may only use once or twice a year, or will the $150 version be enough? Finding the median is very important.

Tools you will likely need:

1) Cordless drill – probably the most used tool for building a wooden playhouse, as you can get into tight spaces without worrying about a cord. However, beware of cheap ones, as they may not provide enough torque (or ‘grunt’!) to drive screws into the wood for an extended period of time.

2) Normal drill – in case the battery runs out on your cordless drill, (and it will!) this is a great backup, or in case you need that extra bit of power.

3) Hammer – this is pretty obvious. However, the top-of-the-line hammer isn’t really necessary, so long as whatever one you have that is comfortable in your hands will suffice.

4) Drill bits – generally you’ll find you’ll be using screws rather than nails when constructing your wooden playhouse. The crucial factor is that the bits need to be as sharp as possible! Cheap drill bits will become dull very quickly, so a good quality set of bits are a good investment

5) Builder’s level – although your wooden playhouse will not have to be built to strict building standards and codes, every effort to ensure it is level will be worth it, both for safety and aesthetics. If you have a level foundation, everything else will fall into place when building the rest. A builder’s level is one commonly used by concreters and is about a metre long. It can allow you to see if there are any warps in longer pieces of wood. However, a normal level will also be sufficient.

6) A tape measure – the main rule anyone should go by when building anything is “Measure twice, cut once”.

7) A circular saw – This tool will give you a very straight cut if used properly. If you have a workbench, a compound Mitre saw will give you the most accurate cut, as well as being very quick and efficient. Although a handsaw is much cheaper and can be used instead of a circular saw, you will be taking more time to do your cutting and also risking a sore shoulder by the end of the day!

This list is not an exhaustive one, but can give you an idea of what you’ll need. There will other bits and pieces required, so the best move is to ask at your local hardware store.

Four Hardware Store Gifts for the Handyman

When it comes to gifts for the handyman in the family, it can be difficult to find something that they want or need. Fortunately, a visit to the local hardware store is often all that is needed to find some inspiration for gift giving. The following are some gift ideas to consider when shopping for the handyman in your life:

Multi-Tool

One great present for the handyman is a quality multi-tool that includes a variety of tools in one simple configuration. There are a variety of multi-tools on the market that include anything from a few basic screwdrivers and pliers to wire cutters, scissors, knives, files, bit drivers, and more. They provide almost every instrument that a person who enjoys fixing things could possibly need, making it an ideal present. They range in price, from an affordable twenty dollars to hundreds of dollars. Consider investing in a quality multi-tool, as they can last for decades when cared for properly.

LED Work Light

A quality work light is another useful gift idea. Many times, work takes place after dark, and regular halogen bulbs do not always provide adequate lighting. Additionally, halogen bulbs can be a burn hazard when adjusted by hand. A portable LED work light is a solution to this problem. They are cool to the touch and will not overheat a workspace. A quick trip to the hardware store can easily provide different sizes and prices of LED work lights for you to choose.

Rolling Creeper Seat

Nothing is more uncomfortable than an aching back and legs after a long day of work. A rolling creeper seat, a simple seat with space underneath for tools and other items, easily prevents achy backs. Some models have a pneumatic lift and contoured seats for comfort. This will be a much-appreciated gift for anyone who works on cars, as it saves hours of time bending and squatting to work.

Portable Mini Vise

A mini vise can attach to any type of workbench, including makeshift benches that are often constructed while on a worksite. Mini vises are small, light, and easily transported in a toolbox. They are ideal for holding spade bits for sharpening or clamping onto broken bolts that need to be removed or cut. A mini vise is a very useful piece of equipment that makes a great present.

While many people may find it difficult to find gifts for the handyman in their lives, there is no need to look any further than the local hardware store. There are a variety of options to choose from that are very useful and will be much appreciated by the recipient. If possible, peruse his workshop to see what he currently has in order to determine what would be most useful as a gift.

Hardware Store Plumbing Tools

Lumber and galvanized irons are not the only items available in a hardware store. There are a variety of other items sold in hardware stores that are essential in construction and maintenance of buildings and houses such as plumbing tools.

In different areas of the house where plumbing is an integral part, there are also appropriate tools and equipments which a professional plumber or even a DIY homeowner could use to efficiently perform a variety of plumbing tasks.

In sinks, tubs and showers, here are some of the tools that prove to be useful:

Cup plunger, a commonly used plunger is a rubber cup attached to a wooden handle that gives a forceful burst of water to clear and unclog sinks, tubs and showers.
Shower Valve Socket Wrench is used to remove and install shower tub fittings and nuts. It features an extra deep socket fitting around the stem in hard to reach areas.
Faucet Seat Wrench to take out and replace the faucet body valve seat in compression faucets which are most of the times found in older homes.
Basin Wrench to tighten and loosen the nuts under a sink holding the faucet in place or to secure connections in deeply recessed places. Basin wrench may also be called as sink wrench.
Adjustable wrenches offer the chance to change the grip on the wrench in performing different jobs while a fixed wrench only offers only one type of jaw opening.

Toilets is also another element that needs appropriate tools like:

Socket Set, also known as ratchet set uses separate removable sockets to fit different fitting and fastener sizes like nuts and bolts.
Flange plunger is especially shaped to seal toilet holes thus acting like a vacuum that clears toilet clogs.

Pipes is another fundamental element in a plumbing system. Some of the tools used to handle pipes are:

Tubing cutters use a steel wheel to cut pipe precisely for well-fitted joints. A close-quarter mini tube cutter is recommended for tight work spaces.
Metal File smooths the pipe edges after cutting for better seal at joints.
Hacksaw is a handy tool for cutting metal or plastic pipes and screws not intended for joint connections.
Slip Joint Pliers are for grabbing, pulling, twisting, holding, tightening or loosening. Its other names are water pump pliers, tongue and groove pliers.
Adjustable Pipe Wrench is used when working on compression fittings.
Combination Tool is used in place of wire brushes, to clean the pipes.

Other tools utilized in plumbing that is also available from hardware stores are:

Plumber’s Tape or Putty to close threading, impede leaks at connections and avoid rust on steel pipes.
Washers and O-rings to stop dripping compression faucets.
Silicone Caulk or Caulk Gun to replace seals around sinks and tubs.
Spray Lubricants are used to loosen obstinate nuts and pipe fittings.
Putty Knife to apply and remove caulk and toilet wax ring residue.

What To Expect In A Hardware Store

Over the years, the number of retail stores continue to increase and with the present situation they are not showing any signs of stopping. As you walk down the street, you see a new building that is being constructed then a few blocks later you see a store that has just opened. These stores sell almost anything from clothes, to shoes, to bags, to accessories, to food, and even to coffee. In fact, almost everything that you need is found in these stores. In addition to that, you do not have to worry about driving for hours because wherever you are there will always be a couple of retail stores located in your vicinity.

Now, if you are fond of doing simple house repairs or if you like renovating a part of your house then you might find these retails store inappropriate. This is indeed true because these retail stores do not sell the items that you need. When it comes to renovating, repairs, and other carpentry projects, do not go to retails stores instead drop by a hardware store. Established utility stores usually sell all the items that you need.

What are these items found in a hardware store?

1. Tools and equipment – can you imagine a store that does not sell any of these? Of course, not because all hardware store carry these items. Tools like screwdrivers, hammers, levels, wrenches, and many more are available. Equipment like lawn mowers and tractors are found in big and well-established stores.
2. Lighting Fixtures – a number of hardware stores sell lighting fixtures and that includes replacement bulbs of all sorts. From your typical incandescent bulb, to fluorescent bulbs, and even to halogen bulbs, you can find all these in this type of store.
3. Fasteners – these can include nuts, bolts, screws, and nails. When constructing or renovating there will come a time when you will have to secure two components together and to that you will need a type of fastener. These fasteners are sold at hardware stores.